iTIG Accessories

Motor Test Accessories

Use the Electrom iTIG to test DC motor armatures, stator coils, and other coils with very low inductance or impedance. The iTIG’s dedicated user interface for DC motor testing is easy to use for quick and accurate testing.

DC Motor Testing

Test-specific accessories are described in the catalog below.

iTIG Foot Switch Accessory

Productivity

Increase efficiency with hands-off testing capability and bar code scanning.

Safety

Provide additional safety measures for the test environment with warning lights.

DC Motor Testing Accessories

Armature Bar-to-Bar Surge Testing

iTIG Armature Bar-to-Bar Surge Test Accessory
ABT

Armature
Bar-to-Bar Surge Test Accessory

The ABT bar-to-bar surge test accessory is compatible with iTIG III and iTIG IV models B, C, and D.

Use the ABT accessory to conduct a bar-to-bar surge comparison test or to surge test single coils with very low inductance. The test voltage measurement is 4-wire and not load dependent. The maximum ABT output is 1400V.

The ABT comes with the BBP bar-to-bar probe and FS-12 foot switch. Select the ASP or SCS as an alternative to the BBP.

iTIG Bar-to-Bar Probe Accessory

Bar-to-Bar Probe

The BBP bar-to-bar probe is included with the ABT accessory.

iTIG Armature Surge Probe Set ASP-22 Accessory
ASP

Armature Surge Probe

The Armature Surge Probe (ASP) works with the ABT accessory. The ASP is an alternative to the BBP that is included with the ABT.

iTIG Surge Clamp Set Accessory
SCS

Surge Clamp Set

The SCS surge clamp set works with the ABT accessory. The SCS is an alternative to the BBP that is included with the ABT.

Probe Sets That Connect Directly to the iTIG

iTIG Armature Test Fixture ATF-11 Accessory
ATF-11

Armature Test Fixture

The ATF-11 armature test fixture is used to conduct span surge tests of DC motor armatures. With an adjustable design, a span test covers multiple-bars.

Use the ATF-11 with an iTIG FS-12 foot switch for easy operation.

iTIG Armature Surge Probe Set ASP-22 Accessory
ASP-22

Armature Surge Probe Set

The ASP-22 armature surge probe set can be used as an alternative to the ATF-11 for span surge tests. The voltage measurement is 2-wire and load dependent.

The ASP-22 option connects directly to the iTIG high voltage leads using the connection box.

iTIG Armature Resistance Probe Set ARP-02 Accessory
ARP-02

Armature Resistance Probe Set

The ARP-02 armature resistance probe set is compatible with iTIG models C and D with microohm measurement and multi-coil test feature.

The ARP-02 is a 4-wire resistance probe set that measures the bar-to-bar resistance on armatures.

Productivity Accessories

iTIG Foot Switch FS-11 Accessory
FS-11

Foot Switch

The FS-11 foot switch works with all iTIG surge tester models.

The FS-11 can be used for starting tests and hands-free operation of the iTIG. 

BCS-12

Bar Code Scanner

The BCS-12 bar code scanner is compatible with iTIG III and iTIG IV models B, C, and D. Use the BCS-12 with the iTIG model D PLTA-3 function.

The BCS-12 scans device bar codes for easy data input.

Safety First

Safety Light

Use the safety warning light to indicate when testing is underway for a safer workplace environment.